How To Videos

How To Setup The Goat

Follow these instructions on how to assemble and use the goat steep assist for the first time.

1. INSERT THE HOOK WITH THE PLASTIC SLEEVE INTO THE TOP POLE. THE TOP POLE HAS ONLY TWO HANDLES ON 6’ POLE ONE HANDLE ON 4’ POLE
2. PUT BOTH HINGE PINS THROUGH THE HOLES OF THE POLE, THE PLASTIC SLEEVE AND THE HOOK SECURING THE HOOK TO THE TOP POLE.
3. SLIDE THE FOOT ONTO THE HOOK AND ATTACH THEM USING THE PIN THAT CAME IN THE FOOT. THE FOOT SHOULD HAVE AN OPEN FACE POINTING AWAY FROM THE POLE. ONE FACE FACING DOWN THE OTHER FACES THE HOOK.
4. ATTACH THE OTHER POLES USING THE PINS THAT ARE IN THE POLES UPON DELIVERY.
5. WARNING, DO NOT ATTEMPT TO USE THIS POLE ON THE SIDE OF A HIP ROOF. THE OPPOSITE SLOPE SHOULD MATCH THE SLOPE YOUR PLACING THE GOAT ON. BE AWARE OF FLAT DORMERS ON THE OPPOSITE SLOPE.
6. READ ALL WARNING LABELS BEFORE USE.
7. ON STEEP ROOFS MAKE SURE YOUR WEARING THE PROPER ROOFING BOOTS. THE GOAT IS DESIGNED TO GIVE YOU A HAND HOLD YOUR SHOES MUST STICK TO THE ROOF.